|
Product Details:
|
| Base Material: | FR-4, FR4 | Copper Thickness: | 1/2OZ 1OZ 2OZ 3OZ |
|---|---|---|---|
| Surface Finishing: | HASL | Product Name: | Battery Wire Connect Test Board |
| Usage: | Lithium Battery Packs | MOQ: | 1 PCS |
| Keywords: | DIY TOOL | Size: | 80*50*3MM |
| High Light: | FR4 24S Lithium Battery Management System,HASL Li Ion Protection Boards,HASL Li Ion Protection Board |
||
3S-24S lithium battery pack lead wire sample cable plug 2.0 connect order fast test board DIY tool Module
Li-Ion Battery BMS Function:
1. Over-discharge protection: When your battery is about to run out and the voltage reaches the minimum required value, the protection board will also be turned off and can no longer be discharged. Your phone will automatically shut down.
2. Overcharge protection: When charging, when the voltage reaches the highest voltage of the battery (4.2V), the protection board will automatically power off and shut down, and cannot be recharged.
3. Short-circuit protection: When your battery is accidentally short-circuited, the protection board will automatically shut down within a few milliseconds and will not be powered on again. The mobile phone battery has a protective plate, which can be used with confidence.
4. Overcurrent protection: When the battery is discharged (used), the protection board will have a maximum current limit (different mobile phones have different requirements), and the protection board will automatically shut down when the discharge exceeds this current.
Li-Ion Battery BMS Parameter:
| Base Material | FR-4, FR4 | Copper Thickness | 1/2OZ 1OZ 2OZ 3OZ |
| Board Thickness | 3mm | Min. Hole Size | 0.1mm |
| Min. Line Width | 0.065mm | Min. Line Spacing | 0.065mm |
| Surface Finishing | HASL | Product Name | Battery Wire Connect Test Board |
| Application | Battery Packs | Usage | Lithium Battery Packs |
| MOQ | 1 PCS | Number Of Layers | 1 Layer |
| Communication | No | Keywords | DIY TOOL |
| Size | 80*50*3MM | Weight | 0.024KGS |
FAQ:
Q:1. Do you have a current sample in stock?
A: Most regular one we have. usually, we will ship out 3 days after you paid
Q:2. What's the delivery time for mass production?
A: Usually 3-7days, it depends on the quantity, especially function and etc. we suggest checking delivery time case by case.
Q:3. OEM&ODM are available?
A: Sure, OEM&ODM are welcome and the Logo can be customized too.
Q:4. What is your MOQ?
A: 1pc is OK. small orders are also welcome
Q:5. What are the common port and separate port? what is the difference?
A: We take 13S48V16A BMS as an example, common port 16A means your charge cathode and discharge cathode are connected in the same point end(our P-), charge cathode and discharge cathode are used in the common connection port, so the charge current and discharge current are the same 16A. while the separate port is separately connected by charge cathode (C-) and discharge cathode (P-), so the charge current and discharge current is different, discharge current 16A, charge current 8A.
Contact Person: Mrs. Nancy Ouyang
Tel: +86-15889650159
